Chargers for lead accumulators
CTEK MXS 10
Out of stock
CTEK MXS 10 lead-acid charger for sealed batteries 12 Volt 10 ADimensions in mm 197x93x49 - weight 0,85 kg
- Manufacturer: CTEK
- Article number: 402050-1
Please log in to shop under your conditions.
Ansmann charger ACS110
Out of stock
Ansmann battery charger ACS110 plug charger for NiMH and NC battery packs - 3 years guarantee
- Article number: 403110-1
- for manufacturer: Universal
- suitable for device: Racing Packs
Please log in to shop under your conditions.
Ansmann charger AC48
Out of stock
Ansmann charger AC48 for 4 - 8 NiMH and NC battery packs
- Manufacturer: Ansmann
- Article number: 403003-1
- for manufacturer: Universal
- suitable for device: Racing Packs
Please log in to shop under your conditions.
Ansmann lead charger BC 6-12 V / 10A
Out of stock
Ansmann lead charger BC 6-12 V / 10AManufacturer No. 1001-0146approx. dimensions in mm 230x101x65 - approx. weight 1,338 kg10-stage car charger for 6V and 12V lead-acid, lead-gel and lead-fleece batteries, as well as 12VLiFePO4 batteries / reliable contacting via pole terminals or ring terminals possible /Clear LCD display - easy to operate / 6 different charging programmes can be set /RECOND mode if the battery is deeply discharged or damaged / selectable COLD TEMP mode (12V AGM/C) at cold temperatures / electronic protection against short circuit, polarity reversal and overchargingand overcharging / battery defect detection / automatic recharging if the battery remains connected to the device / ideal for winter storage of lead batteries - deep discharge excluded /Dust and water jet protected thanks to IP65Scope of delivery: Charger, pole terminals, ring terminals, vehicle socket, operating instructions
- Manufacturer: Ansmann
- Article number: 402081
Please log in to shop under your conditions.
Ansmann lead charger BC 6-12 V / 6A
Available
Ansmann lead charger BC 6-12 V / 6AManufacturer No. 1001-0145approx. dimensions in mm 230x101x65 - approx. weight 1,148 kg10-stage car charger for 6V and 12V lead-acid, lead-gel and lead-fleece batteries, as well as 12VLiFePO4 batteries / reliable contacting via pole terminals or ring terminals possible /Clear LCD display - easy to operate / 6 different charging programmes can be set /RECOND mode if the battery is deeply discharged or damaged / selectable COLD TEMP mode (12V AGM/C) at cold temperatures / electronic protection against short circuit, reverse polarity and overchargingand overcharging / battery defect detection / automatic recharging if the battery remains connected to the devicedevice / ideal for winter storage of lead-acid batteries - deep discharge excluded/ protected against dust and water jets thanks to IP65Scope of delivery: Charger, pole terminals, ring terminals, operating instructions
- Manufacturer: Ansmann
- Article number: 402080
Please log in to shop under your conditions.
Ansmann lead charger BC 6-12 V / 4A
Available
Ansmann lead charger BC 6-12 V / 4AManufacturer No. 1001-0144approx. dimensions in mm 193x50x52 - approx. weight 0,862 kg10-stage car charger for 6V and 12V lead-acid, lead-gel and lead-fleece batteries, as well as 12VLiFePO4 batteries / reliable contacting via pole terminals or ring terminals possible /Clear LCD display - easy to operate / 6 different charging programmes can be set /RECOND mode if the battery is deeply discharged or damaged / selectable COLD TEMP mode (12V AGM/C) at cold temperatures / electronic protection against short circuit, polarity reversal and overchargingand overcharging / battery defect detection / automatic recharging if the battery remains connected to the device / ideal for winter storage of lead batteries - deep discharge excluded /Dust and water jet protected thanks to IP65Scope of delivery: Charger, pole terminals, ring terminals, operating instructions
- Manufacturer: Ansmann
- Article number: 402079
Please log in to shop under your conditions.
Ansmann lead charger BC 6-12 V / 1A
Out of stock
Ansmann lead charger BC 6-12 V / 1AManufacturer No. 1001-0142approx. dimensions in mm 124x69x41 - approx. weight 0,617 kg5-stage car charger for 6V and 12V lead-acid, lead-gel and lead-fleece batteries / automatic voltage detection / reliable contacting via pole terminals or ring terminalspossible / LED display / electronic protection against short circuit, reverse polarity and overcharging / battery defect detectionbattery defect detection / automatic recharging if the battery remains connected to the deviceideal for winter storage of lead batteries - deep discharge excluded / dust and water jet-proof thanks to IP65 ratingScope of delivery: Charger, pole terminals, ring terminals, operating instructions
- Manufacturer: Ansmann
- Article number: 402077
Please log in to shop under your conditions.
CTEK MXS 5.0 Polar
Out of stock
CTEK MXS 5.0 Polar edition EU Lead acid charger for sealed batteries 12 Volt 5 Aapprox. weight 0,800 kg Battery capacity 1.2-160 AhCharging category Charging with alternating currentBack discharge current Less than 1 Ah/monthBattery voltage 12 VBattery chemistry Lead-acidAmbient temperature -30 °C to +50 °CInput 220-240 VAC, 50-60 Hz, 0.6 AOutput 14.4/15.0/15.8 V, 5.0 AStart voltage 2.0 VRipple Less than 4Battery types 12 V:; WET; MF; Ca/Ca; AGM; GELIP class IP65Warranty 5 yearsTranslated with www.DeepL.com/Translator (free version)
- Manufacturer: CTEK
- Article number: 402072
Please log in to shop under your conditions.
Ansmann charger ALCT6-24/10
Out of stock
Ansmann charger ALCT6-24/10
- Manufacturer: Ansmann
- Article number: 402064
Please log in to shop under your conditions.
CTEK XS 0,8 lead-acid charger
Out of stock
CTEK XS 0,8 lead-acid charger for sealed batteries 12 Volt with IUoUp characterstic curveDimensions in mm 145x55x38 - weight 0,4 kg
- Manufacturer: CTEK
- Article number: 402055
Please log in to shop under your conditions.
Ansmann plug-in charger ALCS2-12/0,4
Out of stock
Ansmann plug-in charger ALCS2-12/0,4 for lead-acid batteries2 / 6/ 12 V
- Manufacturer: Ansmann
- Article number: 402052
Please log in to shop under your conditions.
CTEK MXS 10 lead-acid battery charger 12 Volt 10 A
Out of stock
CTEK MXS 10 lead-acid battery charger 12 Volt 10 ADimensions in mm 197x93x49 - weight 0,85 kgVolt 12VRated Voltage AC 220–240VAC, 50–60HzCharging voltage NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V, SUPPLY: 13.6VMin battery voltage 2.0VCharging current 10A maxCurrent, mains 1.0A rms (at full charging current)Back current drain <1ah>1ah>Ripple Less than 4% voltageAmbient temp.: -20°C to +50°C, output power is reduced automatically at high temperaturesCharger type 8 step, fully automatic charging cycleBattery types All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)Battery capacity 20–200Ah, up to 300Ah for maintenance
- Manufacturer: CTEK
- Article number: 402050
Please log in to shop under your conditions.
CTEK Cig plug connection cable suitable for MXS 3.6, MXS 5.0, MXS 7.0 type 56-263
Out of stock
CTEK Cig plug connection cable suitable for XS800, XC800, XS 3600, XS 4003, XS 7000, XS 0.8, XC 0.8, MXS 3.6, MXS 5.0, MXS 7.0
- Manufacturer: CTEK
- Article number: 402048
Please log in to shop under your conditions.
CTEK PRO25S EU lead charger
Out of stock
CTEK PRO25S EU lead charger for sealed batteries 12V 25Aapprox. dimensions in mm 233x124x62 - approx. weight 1,84 kg
- Manufacturer: CTEK
- Article number: 402046-1
Please log in to shop under your conditions.
CTEK MXS 5.0 Test & Charge
Out of stock
CTEK MXS 5.0 Test & Charge charger for sealed lead batteries12 Volt 5,0 Aapprox. weight 0,828 kg
- Manufacturer: CTEK
- Article number: 402045-TC
Please log in to shop under your conditions.
CTEK MXS 5.0
Available
CTEK MXS 5.0 charger for sealed lead batteries12 Volt 5,0 A - dimensions in mm 168x65x38 - weight 0,5 kg
- Manufacturer: CTEK
- Article number: 402045
Please log in to shop under your conditions.
CTEK MXT 4.0 charger for sealed lead batteries
Available
CTEK MXT 4.0 charger for sealed lead batteries24 Volt 4 A- fully automatic ‘connect and forget’ 8 step charging- can be used as a power source- easy to read LED display- safe spark free operation- reverse polarity protected- short circuit proof2-year warrantyTechnical data:Battery capacity: 8–250 AhCharging current: 4 A maxCharging category: AC chargingBattery voltage: 24 VBattery chemistry:Lead acid (AGM, GEL, EFB, MF, CaCa)Ambient operating temperature:-20 °C to +50 °COutput: 28.8/29.4/31.4 V, 4.0 AStart voltage: 2.0 VInput: 220–240 VAC, 50–60 Hz, 1.2 AIngress protection: IP65Dimensions (L x W x H)191 x 89 x 48 mmNet weight (unit with cables)0.8 kg
- Manufacturer: CTEK
- Article number: 402043
Please log in to shop under your conditions.
CTEK MXS 7.0
Out of stock
CTEK MXS 7.0 charger for sealed lead-acid batteries with IUoU12 Volt 7,0 A
- Manufacturer: CTEK
- Article number: 402041
Please log in to shop under your conditions.
Ctek MXT 14 lead-acid charger for sealed batteries 24 V
Out of stock
Ctek MXT 14 lead-acid charger for sealed batteries 24 Volt 14 A- chargecurrent up to: 14 A max- ambient temperature: -20°C to +50°C,- for 24 V Batteries (wett/ AGM/ maintanance free/ Gel )- battery capacity fom 28 Ah to 300 Ah- dimensions: 235x130x65mm (LxBxH)- IP44- weight: 1,9 kg
- Manufacturer: CTEK
- Article number: 402035
Please log in to shop under your conditions.
Fronius Acctiva Smart 25A battery charger
Out of stock
Fronius Acctiva Smart 25A battery charger for 6-12-24 volt application
- Manufacturer: Fronius
- Article number: 402033-1
Please log in to shop under your conditions.
Ansmann charger ALCS2-24A
Available
Ansmann charger ALCS2-24A for lead-acid batteries from 2 Volt to 24 Volt With 2-24 Ah IU-characteristic curve
- Manufacturer: Ansmann
- Article number: 402007
Please log in to shop under your conditions.
Ansmann lead charger BC 6-12 V / 2A
Out of stock
Ansmann lead charger BC 6-12 V / 2AManufacturer No. 1001-0143approx. dimensions in mm 180x79x49 - approx. weight 0,745 kg8-stage car charger for 6V and 12V lead-acid, lead-gel and lead-fleece batteries, as well as 12VLiFePO4 batteries / reliable contacting via pole terminals or ring terminals possible/ LED display of the selected charging programme and the capacity in 25% increments / 3 charging programmes each with 1A or 2A charging current adjustable / electronic protection against short circuit,polarity reversal and overcharging / battery defect detection / automatic recharging if the battery remainsbattery remains connected to the device / ideal for winter storage of lead-acid batteries - deep dischargeexcluded / protected against dust and water jets thanks to IP65Scope of delivery: Charger, pole terminals, ring terminals, operating instructions
- Manufacturer: Ansmann
- Article number: 402078
Please log in to shop under your conditions.